A telehandler jib, also known as a boom pole or telehandler boom extension, is an accessory designed to create a longer reach for a telehandler, which is a type of lift that combines the features of a forklift and a crane. The jib allows for increased versatility and expands the applications of the telehandler on a job site, particularly for lifting and placing materials in hard-to-reach areas.

Shop for Jib / Boom Pole on Durattach.com


### Key Features:
1. **Extension**: The jib extends the reach of the telehandler, enabling it to lift loads further out.
2. **Pivoting Capability**: Many jibs allow for pivoting, which can help in positioning loads with increased precision.
3. **Weight Capacity**: Each jib will have a specific weight capacity that should not be exceeded for safety.

### How to Use a Telehandler Jib:

1. **Attach the Jib**:
– **Safety First**: Before connecting the jib, ensure that both the telehandler and the jib are on stable ground and that the machine is turned off.
– **Secure Connection**: Properly connect the jib to the telehandler’s attachment point, following the manufacturer’s instructions carefully.

2. **Setup and Check**:
– **Inspect the Jib**: Check for any structural damage, wear, or loose components.
– **Ensure Load Capacity**: Confirm that the load you plan to lift is within the jib’s weight limit.

3. **Load the Jib**:
– Use appropriate rigging equipment (like slings or chains) to secure the load to the jib.
– Make sure the load is balanced and securely attached before lifting.

4. **Lift the Load**:
– Start the telehandler and lift the load slowly and steadily. Avoid jerky movements.
– Use the controls to lift and reposition the load as needed.

5. **Place the Load**:
– Once the load is in the desired position, carefully lower it down.
– Ensure that the area is clear and safe before lowering the load.

6. **Detach the Load**:
– After placing the load, disengage any rigging equipment while ensuring the load remains stable.

7. **Remove the Jib**:
– After completing the task, follow the manufacturer’s guidelines for safely detaching the jib from the telehandler.

### Safety Precautions:
– Always read the operator’s manual for both the telehandler and the jib for specific operational guidelines.
– Never exceed the weight limit of the jib.
– Ensure the load is adequately secured before lifting.
– Beware of the telehandler’s stability, especially when extended.
– Use spotters when necessary, especially in tight spaces or when visibility is limited.

By following these steps and adhering to safety protocols, a telehandler jib can be a valuable tool for various lifting tasks in construction and other industries.

Durattach has many Jib / Boom Pole available. Order online today and have it shipped to your door!

Browse Jib / Boom Pole