An excavator post hole digger is an attachment specifically designed to be used with an excavator for drilling holes in the ground, commonly for installing posts, such as fence posts, tree stakes, or deck supports. The device consists of a rotating auger that drills into the ground to create a hole of varying depths and diameters, depending on the size of the auger used.

### How to Use an Excavator Post Hole Digger:

1. **Attach the Digger**: Before starting, ensure that the post hole digger attachment is properly secured to the excavator’s hydraulic coupler.

2. **Select the Location**: Identify the spot where you want to dig the post hole. Mark the location if necessary.

3. **Set the Excavator**: Position the excavator over the marked spot, ensuring it is stable. Check the surrounding area for any hazards such as underground utilities.

4. **Lower the Auger**: Use the excavator’s controls to lower the auger directly over the designated spot.

5. **Align the Auger**: Ensure the auger is vertical and aligned properly to create a straight hole.

6. **Activate the Drill**: Engage the hydraulic system to start rotating the auger. You may need to apply downward pressure to penetrate the ground.

7. **Drilling the Hole**: As the auger drills, you may need to periodically lift it out of the hole to clear soil and debris from the auger’s flights. This is especially important if you are drilling a deep hole.

8. **Monitor Depth**: Keep track of the depth of the hole as you drill, stopping to check it when needed.

9. **Finish the Hole**: Once you reach the desired depth, lift the auger from the hole. Ensure any loose dirt is cleared away from the site.

10. **Post Installation**: After the holes are dug, you can proceed with installing the posts or any other structures that require the holes.

### Safety Tips:

– Always wear appropriate safety gear, such as gloves, hard hats, and safety glasses.
– Be aware of your surroundings and ensure no one is close to the work area while operating the excavator.
– Check for underground utilities before digging to prevent injuries or damages.
– Operate the excavator according to the manufacturer’s guidelines and safety precautions.

Using an excavator post hole digger can greatly speed up the process of digging holes compared to manual methods, especially in tough soil conditions or when many holes are required.

Durattach has many Post Hole Digger available. Order online today and have it shipped to your door!

Browse Post Hole Digger