Baumalight Stump Blaster 3-Point Tractor Stump Grinder Model 3P40

In Stock
SKU
ELL-BAU-3P40
Compare at: $11,000.00 Our Price: $10,450.00
Compare at : $11,000.00
Our Price : $10,450.00
SKU : ELL-BAU-3P40
Identifier : BAU-1495
Availability :

Ships in Approximately 10-15 Business Days. May be subject to unexpected delays.

Baumalight Stump Blaster 3-Point Tractor Stump Grinder Model 3P40
Baumalight Stump Blaster 3-Point Tractor Stump Grinder Model 3P40 Baumalight Stump Blaster 3-Point Tractor Stump Grinder Model 3P40 Baumalight Stump Blaster 3-Point Tractor Stump Grinder Model 3P40 Baumalight Stump Blaster 3-Point Tractor Stump Grinder Model 3P40 Baumalight Stump Blaster 3-Point Tractor Stump Grinder Model 3P40 Baumalight Stump Blaster 3-Point Tractor Stump Grinder Model 3P40

Images are representative but may vary from actual product and/or show optional features.

SAVE $550.00

The Baumalight Stump Blaster 3-Point Tractor Stump Grinder Model 3P40 rips into stumps with a 34" Rotor carrying 54 replaceable teeth. The cutting wheel is powered by the PTO (1,000) on your tractor with the swing and lift cylinders activated by the standard remotes on the tractor as well. The 54 teeth on the 34” cutter means less cutting for each tooth resulting in longer tooth life and smoother cutting for less wear on your tractor. Units are shipped standard with PTO shaft & standard hydraulic quick couplers. The floating deflector contains the chips and debris and can be swung completely out of the way to cut close to fences. Grease zerks and replaceable brass bushings provided at major pivot points for extended service life. Heavy tooth population makes finer mulch and allows much smoother operation.


 


Features:


 ▪ Flow Control - Make sure you adjust your flow control. This control allows you to adjust the cutting sweep to get the smothest cut possible, the full return allows you to return to the start of the cutting sweep as quickly as possible. The Flow Control allows you to fine tune the cutting pass speed, to match the size and performance of your tractor.
▪ Gear Box - The rugged gear box transfers the PTO power from the tractor to the Stump Blaster Cutting System. Delivering 810 RPM and 803 Ft.-Lbs of torque of cutting power to the rotor and teeth.
▪ Stabilizer Base - The heavy duty base provides a solid base for grinding. This allows for more consistent grinding performance and reduces the stress on your tractor.
▪ Grease zerks and replaceable brass bushings provided at major pivot points for extended service life.
▪ Hydraulic Lift & Swing.
▪ 34 Replaceable, Carbide Teeth.
▪ Some Assembly Required.

More Information
SKU ELL-BAU-3P40
Weight 1180 lbs
Identifier BAU-1495
Model 3P40
Product Video http://www.youtube.com/watch?feature=player_embedded&v=la53gJpnlSM
Horsepower Recommended 60 - 120 HP (44.7 - 89.5 KW)
Required Hydraulic Flow 5 - 20 gpm (18.9 - 75.7 lpm)
Hydraulic Hoses/Couplers Hoses & Couplers Included
Required Hydraulic Remote(s) 1 or 2 Sets (1 set requires optional control valve)
Cutting Wheel Diameter 30" ( 76 cm)
Cutting Wheel Speed 1000 RPM
Maximum Cutting Height - Above Ground 25" (64 cm)
Maximum Cutting Depth - Below Ground 14" (36 cm)
Maximum Cutting Depth - Per Pass 9" (23 cm)
Cutting Arc 65 Degrees
Teeth 54 Carbide Teeth (replaceable)
Unit Drive Type 1,000 RPM Rear Tractor PTO
PTO Speed 1,000 RPM
PTO Shaft Included, with Heavy Duty Slip Clutch Protection
Hitch Connection Type Category 2, 3-Point Hitch
Color Gray
Manufacturer Baumalight
Contact Us